BG-Solv™ 717 is a powerful solvent cleaner designed for high penetration and rapid removal of ink and graffiti from hard surfaces. The product also is effective at removing grease, oil residue and dirt. It works well on metals, painted surfaces, and some plastics. Application areas include schools, offices, subways, bus stations, factories, or any place that unwanted dirt and graffiti have appeared.

BG-Solv™ 717 aggressively penetrates and removes inks and graffiti from most non-porous surfaces restoring them to original condition

BG-Solv™ 717 offers significant advantages compared to other cleaner including:

• BG-Solv™ 717 cleans as well as chemicals such as Methylene Chloride, but without the negative safety and environmental impacts
• BG-Solv™ 717 not only works on inks and paints but also can clean oil and grease, making it a dual use product.
• BG-Solv™ 717 rinses clean with water and leaves no residue behind.
• BG-Solv™ 717 is safe to store, handle, and use and is 100% rapidly biodegradable.
• BG-Solv™ 717 work well on fabric surfaces such as carpets and upholstery.
• BG-Solv™ 717 can be applied by hand or in conjunction with power washers.

Product Application

Application concentrations for BG-Solv™ 717 will vary with the usage situation. When cleaning ink and graffiti, use anywhere from a full concentrate product to a 20% solution. When cleaning dirt and grease use a 10% to 20% solution.

Aookucatuib methods will also have an effect on the concentration of chemical needed. Applying the product by hand requires higher concentrations than applying the product by high pressure.

When applying BG-Solv™ 717 simply spray it on and allow it to set for 1 to 3 minutes. Then agitate the surface to be cleaned with a brush or high pressure water. Last, rinse the surface with clean water and repeat as necessary.